E521.02 Datasheet, PDF (58/82 Pages) ELMOS Semiconductor AG – High efficiency 5V DC/DC buck converter

CAN/LIN SBC Family with DC/DC Voltage Regulator E521.02/03/04/12/13/14
PRODUCTION DATA – Mar 7, 2016
Register LIN3_CFG (0x28) - should not be used with E521.02 and E521.12
MSB
LSB
Content
-
FAILINT FLASH WUINT WUCFG WU
TR
RC
Reset value
0
0
0
0
1
1
0
0
Access
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bit Description FAILINT :
1...Interrupt enabled for LIN failures, could only be set if RC is set. This is locked by hardware.
0...Interrupt disabled for LIN failures
FLASH : The FLASH mode deactivates filtering and provides a baud rate of up to 125kBaud for
transmitting and 250kBaud for receiving.
1...Flash mode enabled
0...Flash mode disabled
WUINT :
1...Interrupt enabled if WU is detected
0...Interrupt disabled if WU is detected
WUCFG :
1... Wake up is performed with next rising edge after LIN wake up debounce time
0.. Wake up is performed after LIN wake up debounce time
WU :
1...Wake up capability enabled, could only be set if RC and TR are not set. This is locked by
hardware.
0...Wake up capability disabled
TR :
1...Transmitter enabled, RC is enabled automatically, WU is cleared
0...Transmitter disabled
RC :
1...receiver enabled, read bus only, WU is cleared
0...receiver disabled
Table 61: Configuration register for LIN3
ELMOS Semiconductor AG reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
Elmos Semiconductor AG
Data Sheet
58 / 82
QM-No.: 25DS0093E.01