E910.01_11 Datasheet, PDF (2/17 Pages) ELMOS Semiconductor AG – Low side dri ver (8 channel , serial inter face )

Low side driver (8 channel, serial interface)
PRODUCTION DATA - MaY 3, 2011
1 Pinout
1.1 Pin Description
E910.01
Pin-No. Name Type ¹⁾ Description
1
GND
Ground
Test mode enable - Active HIGH > 3V : Test Mode 1
2
TEST
AI Test mode enable - Active HIGH > 16V: Test Mode 2
for application use : Connect to ground
3
OUT3
AO Open - drain low - side driver
4
OUT2
AO Open - drain low - side driver
5
OUT1
AO Open - drain low - side driver
6
OUT0
AO Open - drain low - side driver
Chip enable - active low (output data is read back on the falling
7
CE
DI edge of the pulse and only after 8 x n falling edges on SCLK is
the output data clocked on the next rising edge)
8
SCLK
DI
Serial data input/output clock
(Data are clocked by the falling edge of the pulse.)
9
SI
DI Serial data input
10
GND
Ground
11
GND
Ground
12
SO
DO Serial data output (high impedance when CE = High)
13
VDD
DS Supply voltage
14
RESET
DI External reset - active low (= internal power on reset)
15
OUT7
AO Open - drain low - side driver
16
OUT6
AO Open - drain low - side driver
17
OUT5
AO Open - drain low - side driver
18
OUT4
AO Open - drain low - side driver
19
NC
Not connected
20
GND
Ground
1) D = Digital, A = Analog, S = Supply, I = Input, O = Output, HV = High Voltage (max. 40V)
ELMOS Semiconductor AG reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
ELMOS Semiconductor AG
Data Sheet
QM-No.: 25DS0038E.00
2/17