ELM84-SERIES Datasheet, PDF (1/21 Pages) ELM Technology Corporation – CMOS 1.2A high current LDO voltage regulator

ELM84xxxxA CMOS 1.2A high current LDO voltage regulator
http://www.elm-tech.com
■General description
ELM84xxxxA is CMOS voltage regulator which is characterized with high current 1.2A and low dropout (45mV
at Vout=3.3V and Iout=300mA). There are 2 types of CE selection of ELM84 series: non-chip enable function
and “H” active. The standard output voltages are 1.2V, 1.8V, 3.3V, 5.0V. ELM84 series can also be made as
semi-custom IC within the range of 0.8V to 5.0V by 0.1V step. This series includes short circuit current limiter,
inrush current limiter and thermal shutdown circuit. Ceramic capacitors with low ESR can be used as input and
output ones. Output capacitor discharge function is also available as semi-custom.
■Features
• Thermal protection circuit
• Current limit protection circuit
• Short protection circuit
• Output voltage range
: 0.8V to 5.0V (by 0.1V)
• Output current
: Min.1.2A, Typ.1.8A
• Stand by current consumption : Max. 1μA (Vin=6.0V at 25°C)
• Load stability
: Typ.15mV(1mA≤Iout≤300mA)
• Input stability
: Typ. 0.02%/V (Vout=3.3V, Iout=100mA)
• Accuracy of output voltage : ±1.0%(Vout≥2.0V) or
±20mV(Vout<2.0V) at Iout=100mA
• Package
: SOT-89, SOT-89-5, SOT-23, SOT-25, SON8-3×3
■Application
• Battery operated devices
• Digital cameras
• Video recorders
• Reference voltage source
■Maximum absolute ratings
Parameter
Symbol
Limit
Unit
Input voltage
Vin
Vss-0.3 to 6.5
V
CE Input voltage
Vce
Vss-0.3 to 6.5
V
Output voltage
Vout
Vss-0.3 to Vin+0.3
V
Output current
Iout
2000 ^{* (1)}
mA
1000 (SOT-89) ^{* (2)}
1000 (SOT-89-5) ^{* (2)}
Power dissipation
Pd
500 (SOT-23) ^{* (2)}
mW
600 (SOT-25) ^{* (2)}
1000 (SON8-3×3) ^{* (2)}
Operationg Temperature
Top
-40 to +85
°C
Storage Temperature
Tstg
-55 to +125
°C
* 1. Output current must not exceed power dissipation specified in maximum absolute ratings.
* 2. Mounted on glass epoxy board (FR-4). (76.2mm×114.3mm×1.6mm : based on EIJ/JEDEC standard size), 2layers,
Cu thickness 35μm, Cu area : top side 20%, back side 100%.
21 - 1
Rev.1.0