ELH0032G Datasheet, PDF (1/12 Pages) Elantec Semiconductor – Fast Operational Amplifier

ELH0032G 883 8001301ZX
Fast Operational Amplifier
Features
 500 V ms slew rate
 70 MHz bandwidth
 10¹²X input impedance
 5 mV max input offset voltage
 FET input
 Offset nulls with single pot
 No compensation required for
gains above 50
 Peak output current to 100 mA
 MIL-STD-883 devices 100%
manufactured in U S A
Ordering Information
Part No
Temp Range Pkg Outline
ELH0032G 883B b55 C to a125 C TO-8 MDP0002
8001301ZX is the SMD version of this device
Connection Diagram
General Description
The ELH0032 is a high slew rate high input impedance differ-
ential operational amplifier suitable for diverse application in
fast signal handling The high allowable differential input volt-
age ease of output clamping and high output drive capability
make the ELH0032 particularly suitable for comparator appli-
cations It may be used in applications normally reserved for
video amplifiers allowing the use of operational gain setting and
frequency response shaping into the megahertz region
The ELH0032’s wide bandwidth high input impedance and
high output drive capability make it an ideal choice for applica-
tions such as summing amplifiers in high-speed D to A’s buff-
ers in data acquisition systems and sample and hold circuits
Additional applications include high-speed integrators and vid-
eo amplifiers The ELH0032 is guaranteed over the temperature
range ^b55 C to ^a125 C
Elantec facilities comply with MIL-I-45208A and other applica-
ble quality specifications Elantec’s Military devices are 100%
fabricated and assembled in our rigidly controlled ultra-clean
facilities in Milpitas California For additional information on
Elantec’s Quality and Reliability Assurance policy and proce-
dures request brochure QRA-1
Simplified Schematic
Top View
Case is electrically isolated
0032 – 1
0032 – 2
Manufactured under U S Patent No 4 746 877
Note All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication however this data sheet cannot be a ‘‘controlled document’’ Current revisions if any to these
specifications are maintained at the factory and are available upon your request We recommend checking the revision level before finalization of your design documentation
CMS 0032DS
1986 Elantec Inc