EL5292C Datasheet, PDF (1/15 Pages) Elantec Semiconductor – Dual 600MHz Current Feedback Amplifier

EL5292C
Dual 600MHz Current Feedback Amplifier
Features
• 600MHz -3dB bandwidth
• 6mA supply current (per amplifier)
• Single and dual supply operation,
from 5V to 10V
• Single (EL5192C) and triple
(EL5392C) available
• High speed, 1GHz product
available (EL5191C)
• Low power, 4mA, 300MHz
product available (EL5193C,
EL5293C, and EL5393C
Applications
• Video Amplifiers
• Cable Drivers
• RGB Amplifiers
• Test Equipment
• Instrumentation
• Current to Voltage Converters
Ordering Information
Part No
EL5292CS
EL5292CS-T7
EL5292CS-T13
Package
8-Pin SO
8-Pin SO
8-Pin SO
Tape &
Reel
-
7”
13”
Outline #
MDP0027
MDP0027
MDP0027
General Description
The EL5292C is a dual current feedback amplifier with a very high
bandwidth of 600MHz. This makes this amplifier ideal for today’s
high speed video and monitor applications.
With a supply current of just 6mA per amplifier and the ability to run
from a single supply voltage from 5V to 10V, the EL5292C is also
ideal for hand held, portable or battery powered equipment.
The EL5292C is offered in the industry standard 8-pin SO. The
EL5292C operates over the industrial temperature range of -40°C to
+85°C.
Pin Configurations
OUTA 1
INA- 2
INA+ 3
VS- 4
8-Pin SO
-
+
-
+
EL5292CS
8 VS+
7 OUTB
6 INB-
5 INB+
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.