EL5281C Datasheet, PDF (1/11 Pages) Elantec Semiconductor – Dual 8ns High-Speed Comparator

EL5281C
Dual 8ns High-Speed Comparator
Features
• 8ns Typ. Propagation Delay
• 5V to 12V Input Supply
• +2.7V to +5V Output Supply
• True-to-ground Input
• Rail-to-rail Outputs
• Active Low Latch
• Single Available (EL5181C)
• Quad Available (EL5481C &
EL5482C)
• Pin-compatible 4ns Family
Available (EL5x85C, EL5287C &
EL5486C)
Applications
• Threshold Detection
• High Speed Sampling Circuits
• High Speed Triggers
• Line Receivers
• PWM Circuits
• High Speed V/F Converters
General Description
The EL5281C comparator is designed for operation in single supply
and dual supply applications with 5V to 12V between V_S+ and V_S-.
For single supplies, the inputs can operate from 0.1V below ground for
use in ground-sensing applications.
The output side of the comparator can be supplied from a single sup-
ply of 2.7V to 5V. The rail-to-rail output swing enables direct
connection of the comparator to both CMOS and TTL logic circuits.
The latch input of the EL5281C can be used to hold the comparator
output value by applying a low logic level to the pin. The EL5281C
features two separate comparators.
The EL5281C is available in the 14-pin SO package and is specified
for operation over the full -40°C to +85°C temperature range. Also
available are a single (EL5181C) and quad versions (EL5481C and
EL5482C).
Pin Configuration
Ordering Information
Part No.
EL5281CS
EL5281CS-T7
EL5281CS-T13
Package
14-Pin SO
14-Pin SO
14-Pin SO
Tape & Reel
-
7”
13”
Outline #
MDP0027
MDP0027
MDP0027
VS+ 1
INA+ 2
INA- 3
NC 4
INB+ 5
INB- 6
VS- 7
+
-
+
-
EL5281C
14-Pin SO
14 VSD
13 OUTA
12 LATCHA
11 NC
10 LATCHB
9 OUTB
8 GND
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.