EL5210C Datasheet, PDF (1/14 Pages) Elantec Semiconductor – 30MHz Rail-to-Rail Input-Output Op Amps

EL5210C/EL5410C
30MHz Rail-to-Rail Input-Output Op Amps
Features
• 30MHz -3dB bandwidth
• Supply voltage = 4.5V to 16.5V
• Low supply current (per amplifier)
= 2.5mA
• High slew rate = 33V/µs
• Unity-gain stable
• Beyond the rails input capability
• Rail-to-rail output swing
• Available in both standard and
space-saving fine pitch packages
Applications
• Driver for A-to-D Converters
• Data Acquisition
• Video Processing
• Audio Processing
• Active Filters
• Test Equipment
• Battery Powered Applications
• Portable Equipment
Ordering Information
Part No.
EL5210CS
EL5210CS-T13
EL5210CY
EL5210CY-T7
EL5210CY-T13
EL5410CS
EL5410CS-T13
EL5410CR
EL5410CR-T13
Package
8-Pin SOIC
8-Pin SOIC
8-Pin MSOP
8-Pin MSOP
8-Pin MSOP
14-Pin SOIC
14-Pin SOIC
14-Pin TSSOP
14-Pin TSSOP
Tape & Reel
-
13”
-
7”
13”
-
13”
-
13”
Outline #
MDP0027
MDP0027
MDP0043
MDP0043
MDP0043
MDP0027
MDP0027
MDP0044
MDP0044
General Description
The EL5210C and EL5410C are low power, high voltage rail-to-rail
input-output amplifiers. The EL5210C contains two amplifiers in one
package and the EL5410C contains four amplifiers. Operating on sup-
plies ranging from 5V to 15V, while consuming only 2.5mA per
amplifier, the EL5410C and EL5210C have a bandwidth of 30MHz --
(-3dB). They also provide common mode input ability beyond the sup-
ply rails, as well as rail-to-rail output capability. This enables these
amplifiers to offer maximum dynamic range at any supply voltage.
The EL5410C and EL5210C also feature fast slewing and settling
times, as well as a high output drive capability of 30mA (sink and
source). These features make these amplifiers ideal for high speed fil-
tering and signal conditioning application. Other applications include
battery power, portable devices, and anywhere low power consump-
tion is important.
The EL5410C is available in a space-saving 14-Pin TSSOP package,
as well as the industry-standard 14-Pin SOIC. The EL5210C is avail-
able in the 8-Pin MSOP and 8-Pin SOIC packages. Both feature a
standard operational amplifier pin out. These amplifiers operate over a
temperature range of -40°C to +85°C.
Connection Diagram
VOUTA ₁
VINA- ₂
-
VINA+ _{3 +}
14 ^VOUTD
13 ^VIND-
-
+ 12 ^VIND+
VS+ 4
11 VS-
VINB+ ₅
+
VINB- _{6 -}
10 ^VINC+
+
- 9 ^VINC-
VOUTB ₇
8 ^VOUTC
EL5410C (TSSOP-14, SOIC-14)
VOUTA 1
8 VS+
VINA- 2 -
+
VINA+ 3
VS- 4
7 VOUTB
- 6 VINB-
+
5 VINB+
EL5210C (MSOP-8, SOIC-8)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2000 Elantec Semiconductor, Inc.