EL5197C Datasheet, PDF (1/15 Pages) Elantec Semiconductor – Single 200MHz Fixed Gain Amplifier

EL5197C, EL5197AC
Single 200MHz Fixed Gain Amplifier with Enable
Features
• Gain selectable (+1, -1, +2)
• 200MHz -3dB BW (A_V = 1, 2)
• 4mA supply current
• Fast enable/disable (EL5197AC
only)
• Single and dual supply operation,
from 5V to 10V
• Available in SOT23 packages
• Triple (EL5397C) available
• 400MHz, 9mA product available
(EL5196C, EL5396C)
Applications
• Battery powered equipment
• Hand held, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Ordering Information
Part No
EL5197CW-T7
EL5197CW-T13
EL5197ACW-T7
EL5197ACW-T13
EL5197ACS
EL5197ACS-T7
EL5197ACS-T13
Package
5-Pin SOT23
5-Pin SOT23
6-Pin SOT23
6-Pin SOT23
8-Pin SO
8-Pin SO
8-Pin SO
Tape &
Reel
7”
13”
7”
13”
-
7”
13”
Outline #
MDP0038
MDP0038
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
General Description
The EL5197C and EL5197AC are fixed gain amplifiers with a band-
width of 200MHz, making these amplifiers ideal for today’s high
speed video and monitor applications. These amplifiers feature inter-
nal gain setting resistors and can be configured in a gain of +1, -1 or
+2. The same bandwidth is seen in both gain-of-1 and gain-of-2
applications.
With a supply current of just 4mA and the ability to run from a single
supply voltage from 5V to 10V, these amplifiers are also ideal for
hand held, portable or battery powered equipment.
The EL5197AC also incorporates an enable and disable function to
reduce the supply current to 100µA typical per amplifier. Allowing the
CE pin to float or applying a low logic level will enable the amplifier.
The EL5197C is offered in the 5-pin SOT23 package and the
EL5197AC is available in the 6-pin SOT23 as well as the industry-
standard 8-pin SO packages. Both operate over the industrial tempera-
ture range of -40°C to +85°C.
Pin Configurations
NC 1
IN- 2
IN+ 3
VS- 4
-
+
EL5197ACS
(8-Pin SO)
8 CE
7 VS+
6 OUT
5 NC
OUT 1
6 VS+
VS- 2
+-
IN+ 3
5 CE
4 IN-
EL5197ACW
(6-Pin SOT23)
OUT 1
5 VS+
VS- 2
+-
IN+ 3
4 IN-
EL5197CW
(5-Pin SOT23)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2002 Elantec Semiconductor, Inc.