EL5192C Datasheet, PDF (1/17 Pages) Elantec Semiconductor – 600MHz Current Feedback Amplifier

EL5192C
600MHz Current Feedback Amplifier
Features
• 600MHz -3dB bandwidth
• 6mA supply current
• Single and dual supply operation,
from 5V to 10V supply span
• Available in 5-pin SOT23 package
• Dual (EL5292C) and triple
(EL5392C) available
• High speed, 1GHz product
available (EL5191C)
• Low power, 4mA, 300MHz
product available (EL5193C,
EL5293C, and EL5393C)
Applications
• Video Amplifiers
• Cable Drivers
• RGB Amplifiers
• Test Equipment
• Instrumentation
• Current to Voltage Converters
Ordering Information
Part No
EL5192CW-T7
EL5192CW-T13
EL5192CS
EL5192CS-T7
EL5192CS-T13
Package
5-Pin SOT23
5-Pin SOT23
8-Pin SO
8-Pin SO
8-Pin SO
Tape &
Reel
7”
13”
-
7”
13”
Outline #
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
General Description
The EL5192C is a current feedback amplifier with a very high band-
width of 600MHz. This makes this amplifier ideal for today’s high
speed video and monitor applications.
With a supply current of just 6mA and the ability to run from a single
supply voltage from 5V to 10V, the EL5192C is also ideal for hand
held, portable or battery-powered equipment.
For applications where board space is critical, the EL5192C is offered
in the 5-pin SOT23 package, as well as an industry standard 8-pin SO.
The EL5192C operates over the industrial temperature range of -40°C
to +85°C.
Pin Configurations
5-Pin SOT23
OUT 1
5 VS+
VS- 2
IN+ 3
EL5192CW
4 IN-
NC 1
IN- 2
IN+ 3
VS- 4
8-Pin SO
-
+
EL5192CS
8 NC*
7 VS+
6 OUT
5 NC
* This pin must be left disconnected
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.