EL4390C Datasheet, PDF (1/16 Pages) Elantec Semiconductor – Triple 80 MHz Video Amplifier with DC Restore

EL4390C
Triple 80 MHz Video Amplifier with DC Restore
Features
 80 MHz ^b3 dB bandwidth for
gains of 1 to 10
 800 V ms slew rate
 15 MHz bandwidth flat to 0 1 dB
 Excellent differential gain and
phase
 TTL CMOS compatible DC
restore function
 Available in 16 lead P-DIP 16
lead SOL
Applications
 RGB drivers requiring DC
restoration
 RGB multiplexers requiring DC
restoration
 RGB building blocks
 Video gain blocks requiring DC
restoration
 Sync and color burst processing
Ordering Information
Part No Temp Range Package Outline
EL4390CN b40 C to a85 C 16-Pin P-DIP MDP0031
EL4390CM b40 C to a85 C 16-Lead SOL MDP0027
General Description
The EL4390C is three wideband current-mode feedback amplifi-
ers optimized for video performance each with a DC restore
amplifier The DC restore function is activated by a common
TTL CMOS compatible control signal while each channel has a
separate restore reference
Each amplifier can drive a load of 150X at video signal levels
The EL4390C operates on supplies as low as g4V up to g15V
Being a current-mode feedback design the bandwidth stays rel-
atively constant at approximately 80MHz over the g1 to g10
gain range The EL4390C has been optimized for use with
1300X feedback resistors
Connection Diagram
4390 – 1
Note All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication however this data sheet cannot be a ‘‘controlled document’’ Current revisions if any to these
specifications are maintained at the factory and are available upon your request We recommend checking the revision level before finalization of your design documentation
1994 Elantec Inc