EL2160C-1 Datasheet, PDF (1/16 Pages) Elantec Semiconductor – 130 MHz Current Feedback Amplifier

EL2160C
130 MHz Current Feedback Amplifier
Features
 130 MHz 3 dB bandwidth
(A_V ^{e a}2)
 180 MHz 3 dB bandwidth
(A_V ^{e a}1)
 0 01% differential gain
R_L ^e 500X
 0 01 differential phase
R_L ^e 500X
 Low supply current 8 5 mA
 Wide supply range g2V to g15V
 80 mA output current (peak)
 Low cost
 1500 V ms slew rate
 Input common mode range to
within 1 5V of supplies
 35 ns settling time to 0 1%
Applications
 Video amplifiers
 Cable drivers
 RGB amplifiers
 Test equipment amplifiers
 Current to voltage converter
Ordering Information
Part No Temp Range Package Outline
EL2160CN b40 C to a85 C 8-Pin P-DIP MDP0031
EL2160CS b40 C to a85 C 8-Pin SOIC MDP0027
General Description
The EL2160C is a current feedback operational amplifier with
b_{3 dB bandwidth of 130 MHz at a gain of} a_{2 Built using the}
Elantec proprietary monolithic complementary bipolar process
this amplifer uses current mode feedback to achieve more band-
width at a given gain than a conventional voltage feedback op-
erational amplifier
The EL2160C is designed to drive a double terminated 75X coax
cable to video levels Differential gain and phase are excellent
when driving both loads of 500X (^k0 01% ^k0 01 ) and double
terminated 75X cables (0 025% 0 1 )
The amplifier can operate on any supply voltage from 4V
(g2V) to 33V (g16 5V) yet consume only 8 5 mA at any sup-
ply voltage Using industry standard pinouts the EL2160C is
available in 8-pin P-DIP and 8-pin SO packages For dual and
quad applications please see the EL2260C EL2460C datasheet
Elantec’s facilities comply with MIL-I-45208A and offer appli-
cable quality specifications See the Elantec document QRA-2
Elantec’s Military Processing Monolithic Products
Connection Diagram
EL2160C SO P-DIP
Packages
Top View
2060 – 1
Note All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication however this data sheet cannot be a ‘‘controlled document’’ Current revisions if any to these
specifications are maintained at the factory and are available upon your request We recommend checking the revision level before finalization of your design documentation
1993 Elantec Inc