EL2125C Datasheet, PDF (1/10 Pages) Elantec Semiconductor – Ultra-low Noise, Low Power, Wideband Amplifier

EL2125C - Preliminary
Ultra-low Noise, Low Power, Wideband Amplifier
Features
• Voltage noise of only 0.83nV/√Hz
• Current noise of only 2.4pA/√Hz
• Low offset voltage ≤200µV
• 180MHz -3dB BW for A_V=10
• Low supply current - 10mA
• SOT23 package available
• ±2.5V to ±15V operation
Applications
• Ultrasound input amplifiers
• Wideband instrumentation
• Communication equipment
• AGC & PLL active filters
• Wideband sensors
General Description
The EL2125C is an ultra-low noise, wideband amplifier that runs on
half the supply current of competitive parts. It is intended for use in
systems such as ultrasound imaging where a very small signal needs to
be amplified by a large amount without adding significant noise. Its
low power dissipation enables it to be packaged in the tiny SOT23
package, which further helps systems where many input channels cre-
ate both space and power dissipation problems.
The EL2125C is stable for gains of 10 and greater and uses traditional
voltage feedback. This allows the use of reactive elements in the feed-
back loop, a common requirement for many filter topologies. It
operates from ±2.5V to ±15V supplies and is available in a 5-pin
SOT23 package and 8-pin SO and 8-pin PDIP packages.
The EL2125C is fabricated in Elantec’s proprietary complementary
bipolar process, and is specified for operation from -45°C to +85°C.
Ordering Information
Part No
EL2125CW
EL2125CS
EL2125CN
Package
5-Pin SOT23
8-Pin SO
8-Pin PDIP
Tape & Reel
Outline #
MDP0038
MDP0027
MDP0031
Connection Diagrams
OUT 1
5 VS+
VS- 2
+-
IN+ 3
4 IN-
EL2125CW
(5-Pin SOT23)
NC 1
8 NC
IN- 2
-
IN+ 3
+
7 VS+
6 OUT
VS- 4
5 NC
EL2125CS
(8-Pin SO and 8-Pin PDIP)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.