RGP15A Datasheet, PDF (2/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

TH97/10561QM
TW00/17276EM
IATF 0060636
SGS TH07/1033
RATING AND CHARACTERISTIC CURVES ( RGP15A - RGP15M )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
10 Ω
Trr
+ 0.5
+
50 Vdc
(approx.)
D.U.T.
1Ω
PULSE
GENERATOR
( NOTE 2 )
OSCILLOSCOPE
( NOTE 1 )
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
0
- 0.25
- 1.0 A
SET TIME BASE FOR 50/100 ns/cm
1 cm
FIG.2 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
1.5
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
50
1.2
40
0.9
TJ = 25 °C
0.6
0.3 ^{60Hz RESISTIVE OR INDUCTIVE LOAD}
0.375" (9.5mm) LEAD LENGTHS
00
25
50
75
100 125 150 175
AMBIENT TEMPERATURE, ( °C)
30
20
8.3 ms SINGLE HALF SINE-WAVE
10
(JEDEC) METHOD
TJ = Tj max.
0
12
4 6 10 20 40 60 100
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS
10
Pulse Width = 300 μs
2% Duty Cycle
TJ = 25 °C
1.0
FIG.5 - TYPICAL REVERSE CHARACTERISTICS
10
TJ = 100 °C
1.0
0.1
0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
FORWARD VOLTAGE, VOLTS
0.1
TJ = 25 °C
0.01
0
20 40
60 80 100 120 140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
Page 2 of 2
Rev. 03 : June 9, 2008