TPSMC43A_12 Datasheet, PDF (1/3 Pages) EIC discrete Semiconductors – AUTOMOTIVE SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

www.eicsemi.com
TH97/2478
TH09/2479
IATF 0113686
SGS TH07/1033
TPSMC6.8 ~ TPSMC43A
AUTOMOTIVE SURFACE MOUNT
TRANSIENT VOLTAGE SUPPRESSOR
VBR : 6.8 - 43 Volts
PPK : 1500 Watts
SMC (DO-214AB)
FEATURES :
* 1500W peak pulse power capability with
a 10/1000ms waveform, repetition rate
(duty cycle): 0.01%
* Excellent clamping capability
* Low incremental surge resistance
* Very fast response time
* For devices with V_(BR) ≥ 10V I_D are typically
less than 1.0mA at Ta = 150°C
* Pb / RoHS Free
MECHANICAL DATA
* Case : SMC Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.21 grams
3.0 ± 0.2
5.8 ± 0.15
1.1 ± 0.3
0.1 ± 0.1
2.3 ± 0.2
0.20± 0.07
Dimensions in millimeters
Maximum Ratings and Thermal Characteristics
Rating at 25 °C ambient temperature unless otherwise specifie.d
Parameter
Peak Pulse Power Dissipation with a 10/1000 μs
waveform (1)(2) Fig.5
Peak power pulse current with a 10/1000µs
waveform (1) Fig.2
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave (2)(3)
Maximum instantaneous forward voltage at 100A(3)
Operating and Storage Temperature Range
Symbol
P_PPM
I_PPM
I_FSM
V_F
T_J, T_STG
Value
Minimum 1500
See Next Table
200
3.5
- 65 to + 185
Notes :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta= 25 °C per Fig. 1
(2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
Unit
W
A
A
V
°C
Page 1 of 3
Rev. 03: October 8, 2012