STUN06I Datasheet, PDF (1/4 Pages) EIC discrete Semiconductors – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

STUN06I - STUN5D0
VBR : 6.8 - 200 Volts
PPK : 1500 Watts
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
SMC (DO-214AB)
FEATURES :
* 1500W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Typical I_R less then 1µA above 10V
* Pb / RoHS Free
0.060(1.5 2)
0.030(0.7 6)
0.008(0.203)
0.004(0.102)
0.121(3.07)
0.115(2.92)
0.245(6.2 2)
0.220(5.5 9)
0.103(2.62 )
0.079(2.00 )
0.012(0.305)
0.006(0.152)
MECHANICAL DATA
* Case : SMC Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.21 grams
Dimensions in inches and (millimeter)
DEVICES FOR BIPOLAR APPLICATIONS
For bi-directional altered the third letter of type from "U" to be "B".
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
Symbol
PPK
PD
IFSM
TJ, TSTG
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on copper Lead area at 5.0 mm² ( 0.013 mm thick ).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Page 1 of 4
Value
Minimum 1500
5.0
200
- 55 to + 150
Unit
W
W
A
°C
Rev. 02 : March 25, 2005