SB120 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – 1 AMPERE SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 50 to 100 Volts CURRENT - 1.0 Ampere)

SB120 - SB1B0
PRV : 20 - 100 Volts
IO : 1.0 Ampere
SCHOTTKY BARRIER
RECTIFIER DIODES
DO - 41
FEATURES :
* High current capability
* High surge current capability
* High reliability
* High efficiency
* Low power loss
* Low forward voltage drop
* Low cost
MECHANICAL DATA :
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.339 gram
0.107 (2.74)
0.080 (2.03)
0.034 (0.86)
0.028 (0.71)
1.00 (25.4)
MIN.
0.205 (5.20)
0.160 (4.10)
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherw ise specified.
Single phase, half w ave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Maximum Recurrent Peak Reverse Voltage
SYMBOL ^{SB SB SB SB SB SB SB SB SB} UNITS
120 130 140 150 160 170 180 190 1B0
VRRM 20 30 40 50 60 70 80 90 100 Volts
Maximum RMS Voltage
VRMS 14 21 28 35 42 49 56 63 70 Volts
Maximum DC Blocking Voltage
VDC 20 30 40 50 60 70 80 90 100 Volts
Maximum Average Forward Current
0.375", 9.5mm Lead Length See Fig.1
IF(AV)
1.0
Amp.
Peak Forward Surge Current, 8.3ms single half sine wave
superimposed on rated load (JEDEC Method)
IFSM
40
Amps.
Maximum Forward Voltage at IF = 1.0 Amp. (Note 2)
VF
0.5
0.7
0.79
Volt.
Maximum Reverse Current at
Ta = 25 °C
IR
0.5
mA
Rated DC Blocking Voltage (Note 1) Ta = 100 °C
IR(H)
10.0
5.0
mA
Typical Thermal Resistance (Note 2)
RθJL
15
°C/W
Junction Temperature Range
TJ
- 40 to + 125
- 65 to + 150
°C
Storage Temperature Range
TSTG
- 65 to + 150
°C
Notes :
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle = 2%.
(2) Thermal Resistance from junction to lead, PC board Mounting w ith 0.375" (9.5mm) Lead Lengths.
UPDATE : SEPTEMBER 12, 1998