S5KP Datasheet, PDF (1/4 Pages) EIC discrete Semiconductors – TRANSIENT VOLTAGE SUPPRESSOR

S5KP SERIES
VBR : 5.0 - 180 Volts
PPK : 5000 Watts
FEATURES :
* 5000W Peak Pulse Power
* Excellent clamping capability
* Low incremental surge resistance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Pb / RoHS Free
MECHANICAL DATA
* Case : D²PAK(TO-263)
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Heatsink is Anode
* Mounting position : Any
* Weight : 1.7 grams (approximately)
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Pulse Power Dissipation at tp = 1ms
(Note 1, Fig. 4)
Steady State Power Dissipation
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 2)
Operating and Storage Temperature Range
TRANSIENT VOLTAGE
SUPPRESSOR
D²PAK
0.409(10.4)
0.387(9.80)
0.189(4.8)
0.137(4.4)
0.055(1.4)
0.047(1.2)
0.110(2.8)
0.055(1.4)
0.039(1.0)
0.108(2.75)
0.092(2.35)
0.236(6.0)
0.197(5.0)
0.035(0.9)max.
0.108(2.75)
0.092(2.35)
0.026(0.7)
0.011(0.3)
0.33(8.38)
0.08(2.032)
0.42(10.66)
0.24(6.096)
0.63(17.02)
0.04(1.016)
Dimensions in inches and ( millimeters )
Symbol
P_PK
P_D
I_FSM
T_J, T_STG
Value
Minimum 5000
8.0
400
- 55 to + 150
Unit
W
W
A
°C
Notes:
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
Page 1 of 4
Rev. 01 : April 27, 2005