P6SMA480A Datasheet, PDF (1/3 Pages) EIC discrete Semiconductors – SURFACE MOUNT UNI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

TH97/10561QM
TW00/17276EM
IATF 0060636
SGS TH07/1033
P6SMA480A ~ P6SMA600A
VBR : 480 ~ 600 Volts
PPK : 600 Watts
SURFACE MOUNT
UNI-DIRECTIONAL TRANSIENT
VOLTAGE SUPPRESSOR
SMA
FEATURES :
* Unidirectional transient voltage suppressor
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Pb / RoHS Free
MECHANICAL DATA :
* Case : SMA Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.060 gram (Approximately)
1.3 ± 0.2
1.6 ± 0.25
2.6 ± 0.15
2.3 ± 0.2
1.6 ± 0.25
Dimensions in millimeters
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use "CA" Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at T_L = 75 °C
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
Symbol
P_PK
P_D
I_FSM
T_J, T_STG
Notes:
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on copper Lead area at 5.0 mm² ( 0.013 mm thick ).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Value
Minimum 600
5.0
50
- 55 to + 150
Unit
Watts
Watts
Amps.
°C
Page 1 of 3
Rev. 01 : September 18, 2008