P6KE Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

P6KE SERIES
VBR : 6.8 - 440 Volts
PPK : 600 Watts
TRANSIENT VOLTAGE
SUPPRESSOR
D2A
FEATURES :
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Typical I_R less then 1µA above 10V
MECHANICAL DATA
* Case : D2A Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.645 gram
0.161 (4.10)
0.154 (3.90)
1.00 (25.4)
MIN.
0.284 (7.20)
0.268 (6.81)
0.0400 (1.02)
0.0385 (0.98)
1.00 (25.4)
MIN.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
Symbol
PPK
PD
IFSM
TJ, TSTG
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on Copper Leaf area of 1.57 in² (40mm²).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Value
Minimum 600
5.0
100
- 65 to + 175
Unit
Watts
Watts
Amps.
°C
UPDATE : SEPTEMBER 30, 1998