P4KE Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)

P4KE SERIES
VBR : 6.8 - 440 Volts
PPK : 400 Watts
TRANSIENT VOLTAGE
SUPPRESSOR
FEATURES :
* 400W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Typical I_R less then 1 A above 10V
MECHANICAL DATA
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.339 gram
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Peak Power Dissipation at Ta = 25 °C, Tp=1ms _(Note1)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) _(Note2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) _(Note3)
Operating and Storage Temperature Range
Note :
PPK
PD
IFSM
TJ, TSTG
Minimum 400
1.0
40
- 65 to + 175
Watts
Watt
Amps.
°C