FW005G_05 Datasheet, PDF (1/2 Pages) EIC discrete Semiconductors – FAST RECOVERY GLASS

FW005G - FW10G
PRV : 50 - 1000 Volts
Io : 1.5 Amperes
FAST RECOVERY GLASS
PASSIVATED BRIDGE RECTIFIERS
WOB
FEATURES :
* Glass passivated chip
* High case dielectric strength
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Ideal for printed circuit board
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated leads solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
* Weight : 1.29 grams
0.22 (5.59)
0.18 (4.57)
0.39 (10.0)
0.31 (7.87)
+ ^AC -
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
AC -
+ AC
0.22 (5.59)
0.18 (4.57)
0.22 (5.59)
0.18 (4.57)
Dimension in inches and (millimeter)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current
0.375" (9.5 mm) lead length
Tc = 25°C
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method)
Rating for fusing ( t < 8.3 ms. )
Maximum Forward Voltage per Diode at IF = 1.0 A
Maximum DC Reverse Current
Ta = 25 °C
at Rated DC Blocking Voltage
Ta = 100 °C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance per Diode (Note 2)
Typical Thermal Resistance (Note 3)
Operating Junction Temperature Range
Storage Temperature Range
SYMBOL
FW
005G
VRRM
50
VRMS
35
VDC
50
FW
01G
100
70
100
FW
02G
200
140
200
FW
04G
400
280
400
FW
06G
600
420
600
FW
08G
800
560
800
FW
10G
1000
700
1000
UNIT
V
V
V
IF(AV)
1.5
A
IFSM
I²t
VF
IR
IR(H)
Trr
CJ
RθJA
TJ
TSTG
30
A
10
A²S
1.3
V
10
µA
1.0
mA
150
250
500
ns
24
pf
36
°C/W
- 50 to + 150
°C
- 50 to + 150
°C
Notes : 1 ) Measured with IF = 0.5 Amp., IR = 1 Amp., Irr = 0.25 Amp.
2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
3 ) Thermal resistance from Junction to Ambient at 0.375" (9.5 mm) lead length P.C. Board mounting.
Page 1 of 2
Rev. 02 : March 25, 2005