FBR2500W Datasheet, PDF (1/2 Pages) EIC discrete Semiconductors – FAST RECOVERY BRIDGE RECTIFIERS

FBR2500W - FBR2510W
PRV : 50 - 1000 Volts
Io : 25 Amperes
FEATURES :
* High case dielectric strength
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Molded plastic with heatsink integrally
mounted in the bridge encapsulation
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Bolt down on heat-sink
with silicone thermal compound between
bridge and mounting surface for maximum
heat transfer efficiency
* Weight : 15.95 grams
FAST RECOVERY
BRIDGE RECTIFIERS
BR50W
0.732 (18.6)
0.692 (17.5)
1.130 (28.7)
1.120 (28.4)
0.470 (11.9)
0.430 (10.9)
0.21 (5.3)
0.20 (5.1)
0.042 (1.06)
0.038 (0.96)
0.310 (7.87)
0.280(7.11)
1.2 (30.5)
MIN.
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
FBR
2500W
FBR
2501W
FBR
2502W
FBR
2504W
FBR
2506W
FBR
2508W
FBR
2510W
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000 V
Maximum Average Forward Current Tc = 55 °C
IF(AV)
25
A
Peak Forward Surge Current Single half sine wave
IFSM
Superimposed on rated load (JEDEC Method)
300
A
Current Squared Time at t < 8.3 ms.
I²t
375
A²S
Maximum Forward Voltage drop per Diode at IF = 12.5 A VF
1.3
V
Maximum DC Reverse Current
Ta = 25 °C
IR
10
µA
at Rated DC Blocking Voltage
Ta = 100 °C
IR(H)
200
µA
Maximum Reverse Recovery Time (Note 1)
Trr
150
250
500
ns
Typical Thermal Resistance per diode (Note 2)
RθJC
1.45
°C/W
Operating Junction Temperature Range
TJ
- 50 to + 150
°C
Storage Temperature Range
TSTG
- 50 to + 150
°C
Notes :
1 ) Measured with IF = 0.5 Amp., IR = 1 Amp., Irr = 0.25 Amp.
2 ) Thermal Resistance from junction to case with units mounted on a 5" x 6" x 4.9" (12.8cm.x 15.2cm.x 12.4cm.) Al.-Finned Plate.
Page 1 of 2
Rev. 02 : March 24, 2005