AKBL400 Datasheet, PDF (1/2 Pages) EIC discrete Semiconductors – AVALANCHE BRIDGE RECTIFIERS

AKBL400 - AKBL410
AVALANCHE BRIDGE
RECTIFIERS
PRV : 50 - 1000 Volts
KBL
Io : 4.0 Amperes
FEATURES :
* High case dielectric strength
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* ldeal for printed circuit board
0.77 (19.56)
0.73 (18.54)
0.825 (20.95)
0.605 (15.36)
+ ^{AC AC}
1.00 (25.4)
MIN.
0.052 (1.32)
0.048 (1.22)
0.200 (5.08)
0.190 (4.82)
MECHANICAL DATA :
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per
MIL - STD 202 , Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
* Weight : 5.15 grams
0.085 (2.16)
0.065 (1.65)
0.265 (6.73 )
0.235 (5.97)
Dimensions in inches and ( millimeter )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
AKBL
400
AKBL
401
AKBL
402
AKBL
404
AKBL
406
AKBL
408
AKBL
410
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000 Volts
Minimum Avalanche Breakdown Voltage at 100 µA
VBO(min.) 100 150 250 450 700 900 1100 Volts
Maximum Avalanche Breakdown Voltage at 100 µA
VBO(max.) 550 600 700 900 1150 1350 1550 Volts
Maximum Average Forward Current Tc = 50°C
IF(AV)
4.0
Amp.
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method)
IFSM
Rating for fusing at ( t < 8.3 ms. )
I²t
200
Amps.
166
A²S
Maximum Forward Voltage per Diode at IF = 4.0 Amps. VF
1.1
Volts
Maximum DC Reverse Current
Ta = 25 °C
at Rated DC Blocking Voltage
Ta = 100 °C
Typical Thermal Resistance (Note1)
IR
IR(H)
RθJA
10
µA
1.0
mA
10
°C/W
Operating Junction Temperature Range
TJ
- 50 to + 150
°C
Storage Temperature Range
TSTG
- 50 to + 150
°C
Notes : 1 ) Thermal resistance from Junction to ambient with units mounted on a 3" x 3" x 0.11" ( 7.5 x 7.5 x 0.3 cm ) Cu. plate.
UPDATE : APRIL 21, 1998