M1206 Datasheet, PDF (1/5 Pages) Electronic Film Capacitors, Inc. – POLYPROPYLENE SNUBBER

ELECTRONIC FILM CAPACITORS, INC.
Reidville Industrial Park * 41 Interstate Lane
WATERBURY, CONNECTICUT 06705
PHONE [phone] FAX [phone]
POLYPROPYLENE SNUBBER
SERIES M1206
EFC Series M1206 are polypropylene capacitors with double-sided metallized plates. This series
offers the advantages of a self-healing metallized dielectric and the high current/pulsing capabilities
(see dv/dt Table) of a metallized capacitor. Packaging options include: wrap and fill (TC, TF), radial
lead box (EFR), and radial lead dip (DFR).
SPECIFICATIONS
1. TEMPERATURE RANGE
- 55 ^OC to + 85 ^OC at rated voltage.
To 105 ^OC with 25% voltage derating.
2. CAPACITANCE
Measured at 25°C at 1 kHz.
3. DIELECTRIC STRENGTH
At 25 ^OC, 200% of rated voltage for 10 seconds.
6. DISSIPATION FACTOR
Shall be 0.1% max. when measured at 25°C at 1 kHz.
7. LIFE TEST
Will withstand the application of 140% rated voltage at
+85 ⁰C for 250 hours with not more than one failure in
12 permitted.
8. PULSE RISE TIME (dv/dt)
4. INSULATION RESISTANCE
At 25°C with maximum 2 minutes charge at rated
voltage or 500 VDC, whichever is less, the minimum
IR shall be 200,000 Megohm-Microfarads, but need
not exceed 250,000 Megohms.
5. HUMIDITY RESISTANCE
Series M1206 shall meet the requirements
of MIL-STD. 202C, Method 103B.
Rated DC
Body Length (inches)
Voltage .500-.531 .709-.750 .968-1.04 1.19-1.26
160
200
110
70
55
250
400
150
130
85
400
420
200
130
100
630
400
190
120
CATALOG NOMENCLATURE
M 1206 EFR - 3 - .001 - 1 - 5
CASE CODE
TC - WRAP & FILL - ROUND - AXIAL
TF - WRAP & FILL - FLAT - AXIAL
EFR - EPOXY CASE - FLAT - RADIAL
DIELECTRIC CODE
1206 - POLYPROPYLENE/FOIL
SIZE CODE
3 - STANDARD
2 - MINIATURE
1 - SUBMINIATURE
X - NON-STANDARD
CAPACITANCE
IN MICROFARADS (µF)
VOLTAGE
1.6 - 160 VDC
2.5 - 250 VDC
4 - 400 VDC
6.3 - 630 VDC
ETC.
OPTION
FOR EFC METRIC CASES USE THE
ONE LETTER CASE CODE LISTED.
HIGH AMPERAGE AND PULSE CURRENTS
Double-sided metallized plates allow these capacitors to handle high
amperage and pulsing currents. Specify with the prefix M.
TOLERANCE
1 - 1%
2 - 2%
5 - 5%
ETC.