1613 Datasheet, PDF (1/9 Pages) Electronic Film Capacitors, Inc. – METALLIZED POLYCARBONATE

ELECTRONIC FILM CAPACITORS, INC.
Reidville Industrial Park * 41 Interstate Lane
WATERBURY, CONNECTICUT 06705
PHONE [phone] FAX [phone] _{METALLIZED POLYCARBONATE}
SERIES 1613
EFC Series 1613 are metallized polycarbonate capacitors. This series offers the
advantage of miniature size, superior stability, self healing, high insulation resistance,
low dissipation factor and high frequency operation. Suggested applications include:
timing circuits, filters, high current applications. Packaging options include: wrap
and fill (TF, TC), radial lead box (EFR), axial lead (EC, EF).
SPECIFICATIONS
1. TEMPERATURE RANGE
4. INSULATION RESISTANCE
- 55 ^OC to +125 ^OC at rated voltage.
At 25 ^OC after 2 minutes charge time at rated voltage
or 500 VDC, whichever is less, the minimum IR shall
2. CAPACITANCE
Capacitors < 1.0 MFD shall be measured
at 1 KHz + 20 HZ. Capacitors >1.0 MFD
shall be measured at 120 HZ. Measurements
be 50,000 Megohm-Microfarad, but need not exceed
100,000 Megohms for voltages greater than 75 VDC,
and 15,000 Megohm-Microfarads, but need not exceed
50,000 Megohms for 75 VDC or less.
shall be taken at 25 ^OC.
5. HUMIDITY RESISTANCE
3. DIELECTRIC STRENGTH
At 25 ^OC, 150% of rated voltage when applied
terminal to terminal for one minute through a
Series 1613 shall meet the requirements
of MIL-STD. 202C, Method 103B.
6. DISSIPATION FACTOR
current limiting resistance.
Shall be 0.3 % max. when measured as in Par. 2.
7. LIFE TEST
Will withstand the application of 140% rated voltage at +125 ⁰C for 250 hours
with not more than one failure in 12 permitted.
TYPICAL TEMPERATURE CURVES
METALLIZED POLYCARBONATE
+1.5
+1.0
CAPACITANCE CHANGE VS. TEMPERATURE
+0.5
0
-0.5
-1.0
-1.5
-55 -25
0
25
50
85
125
Temperature (^OC)
DISSIPATION FACTOR VS. TEMPERATURE
1.5
1.0
0.5
0
-55 -25
0
25
50
85
125
Temperature (^OC)
INSULATION RESISTANCE VS. TEMPERATURE
10⁶
10⁵
10⁴
10³
10²
+25
+50
+85
Temperature (^OC)
+125