LNQ32T Datasheet, PDF (3/4 Pages) ECM Electronics Limited. – SMD Ferrite Chip Inductors

ECM SMD Ferrite Chip Inductors
ECM
L
Part
(µH)
Tol Q Min.
% (**MHz)
SRF R_DC
Min. MAX
(MHz) (Ω)
I_DC
I_N
(Ma)
LNQ32T Series (1210) Continued…
LNQ32T-221 220 @ 1MHz K,J 40 @ 0.796MHz 6
LNQ32T-271 270 @ 1MHz K,J 40 @ 0.796MHz 5
LNQ32T-331 330 @ 1MHz K,J 40 @ 0.796MHz 5
LNQ32T-391 390 @ 1MHz K,J 50 @ 0.796MHz 5
LNQ32T-471 470 @ 1kHz K,J 50 @ 0.796MHz 5
LNQ32T-561 560 @ 1kHz K,J 50 @ 0.796MHz 5
11.8 65
12.5 65
13.0 65
22.0 50
25.0 45
28.0 40
LNQ45T Series (1812)
LNQ45T-1R0 1.0 @ 1MHz M 20 @ 1MHz 120 0.20 500
LNQ45T-1R2 1.2 @ 1MHz M 20 @ 1MHz 100 0.20 500
LNQ45T-1R5 1.5 @ 1MHz M 20 @ 1MHz
85 0.30 500
LNQ45T-1R8 1.8 @ 1MHz M 20 @ 1MHz
75 0.30 500
LNQ45T-2R2 2.2 @ 1MHz M 20 @ 1MHz
62 0.30 500
LNQ45T-2R7 2.7 @ 1MHz M 20 @ 1MHz
53 0.32 500
LNQ45T-3R3 3.3 @ 1MHz M 20 @ 1MHz
47 0.35 500
LNQ45T-3R9 3.9 @ 1MHz M 20 @ 1MHz
41 0.38 500
LNQ45T-4R7 4.7 @ 1MHz M,K 30 @ 1MHz
38 0.40 500
LNQ45T-5R6 5.6 @ 1MHz M,K 30 @ 1MHz
33 0.47 500
LNQ45T-6R8 6.8 @ 1MHz M,K 30 @ 1MHz
31 0.50 450
LNQ45T-8R2 8.2 @ 1MHz M,K 30 @ 1MHz
27 0.56 450
LNQ45T-100 10 @ 1MHz K,J 35 @ 1MHz
23 0.56 400
LNQ45T-120 12 @ 1MHz K,J 35 @ 1MHz
21 0.62 380
LNQ45T-150 15 @ 1MHz K,J 35 @ 1MHz
19 0.73 360
LNQ45T-180 18 @ 1MHz K,J 35 @ 1MHz
17 0.82 340
LNQ45T-220 22 @ 1MHz K,J 35 @ 1MHz
15 0.94 320
LNQ45T-270 27 @ 1MHz K,J 35 @ 1MHz
14 1.1 300
LNQ45T-330 33 @ 1MHz K,J 35 @ 1MHz
12 1.2 270
LNQ45T-390 39 @ 1MHz K,J 35 @ 1MHz
11 1.4 240
LNQ45T-470 47 @ 1MHz K,J 35 @ 1MHz
10 1.5 220
LNQ45T-560 56 @ 1MHz K,J 35 @ 1MHz
9
1.7 200
LNQ45T-680 68 @ 1MHz K,J 35 @ 1MHz
8
1.9 180
LNQ45T-820 82 @ 1MHz K,J 35 @ 1MHz
7
2.2 170
LNQ45T-101 100 @ 1MHz K,J 40 @ 0.796MHz 6
2.5 160
LNQ45T-121 120 @ 1MHz K,J 40 @ 0.796MHz 6
3.0 150
TOLERANCES J=5%, K=10%, M=20%.
ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK
Tel: [phone]: Fax: [phone]. Email: [e-mail]
Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to
discontinue any product or make design changes we believe necessary.
Issue 1