E11C1 Datasheet, PDF (8/13 Pages) Ecliptek Corporation – OSCILLATOR

E13C2 Series
• PECL Output Oscillators
• 3.3V supply voltage
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
NOTES
E13C2
H 5.1
L 14.2
W 9.85
OSCILLATOR
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE ^{_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________}
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V_CC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (V_OH)
Output Voltage Logic Low (V_OL)
Rise Time / Fall Time
Duty Cycle
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
V_IL of V_CC-1.475V_DC Maximum
No Connection
V_IH of V_CC-1.165V_DC Minimum
FJ = 12kHz to 20MHz
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
3.3V_DC ±5%
75mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
V_CC-1.025V_DC Minimum
V_CC-1.620V_DC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into V_CC-2.0V_DC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Enables Output
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13C2
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS64
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision ₁₅₈ Specifications subject to change without notice.