E11W1 Datasheet, PDF (4/5 Pages) Ecliptek Corporation – OSCILLATOR

E13W1 Series
• PECL Output Oscillators
• 3.3V supply voltage
• 4 pad PCB SMD package
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
NOTES
E13W1
H 5.5
L 14.8
W 9.8
OSCILLATOR
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE ^{_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________}
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V_CC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (V_OH)
Output Voltage Logic Low (V_OL)
Rise Time / Fall Time
Duty Cycle
Available at Frequencies < 212.500MHz
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, Aging, Shock,
and Vibration
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
V_IL of V_CC-1.475V_DC Maximum
No Connection
V_IH of V_CC-1.165V_DC Minimum
FJ = 12kHz to 20MHz
SERIES
E13W1
PACKAGE
4-PCB
VOLTAGE
3.3V
19.440MHz to 250.000MHz
0°C to 70°C
-40°C to 85°C
-55°C to 125°C
3.3V_DC ±5%
75mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
V_CC-1.025V_DC Minimum
V_CC-1.620V_DC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into V_CC-2.0V_DC
No Connect, Enable/Disable, or
Complementary Output
Enables Output
Enables Output
Disable Output: Logic Low
10 mSeconds Maximum
1 pSec Maximum
CLASS
OS75
REV.DATE
01/03
800-ECLIPTEK www.ecliptek.com for latest revision ₁₇₂ Specifications subject to change without notice.