EV32C1 Datasheet, PDF (2/2 Pages) Ecliptek Corporation – CERAMIC SMD3.3V HCMOS/TTL VCXO

STANDARD SPECIFICATIONS
Frequency Range (FO)
Code
16.384MHz to 44.736MHz (See TEN08-563-800 for a list of standard frequencies)
Frequency Tolerance & Stability / Operating
A
Temperature Range (OTR)
B
(All Values Inclusive of OTR, Vdd, and CLOAD, with
D
VC = 1.65VDC)
E
Not Specified over 0°C to +70°C
Not Specified over -40°C to +85°C
±50ppm Max. over 0°C to +70°C
±25ppm Max. over 0°C to +70°C
F
±20ppm Max. over 0°C to +70°C
H
±50ppm Max. over -40°C to +85°C
J
±25ppm Max. over -40°C to +85°C
Storage Temperature Range (STR)
-55°C to +125°C
Supply Voltage (VDD) / Input Current (IDD)
Output Voltage Logic High (VOH)
3.3VDC ±10% / 15mA Maximum
90% of VDD Minimum
Output Voltage Logic Low (VOL)
Rise/Fall Time (TR/TF)
10% of VDD Maximum
5nSec Maximum (20% to 80% of waveform)
Duty Cycle (SYM)
1
50% ±10% (@ 50% of waveform)
2
50% ±5% (@ 50% of waveform)
Load Drive Capability (CLOAD)
15pF HCMOS Load Maximum
Start Up Time (TS) / Aging (@ 25°C)
10 mSec Maximum / ±2ppm/1st year Typical, ±10ppm/10 years Maximum
Typical Phase Noise (at offsets 10Hz to 1MHz)
-70dBc/Hz, -100dBc/Hz, -130dBc/Hz, -147dBc/Hz, -152dBc/Hz, and -155dBc/Hz
Period Jitter: RMS (TJRMS)
Not Specified
Absolute Pull Range (APR)
1
±20ppm Minimum
[All Values Inclusive of OTR, Vdd, CLOAD, and Aging
2
over Control Voltage Range (VC)]
3
±32ppm Minimum
±50ppm Minimum
4
±80ppm Minimum
Linearity
5
±100ppm Minimum
A
±20% Maximum
B
±15% Maximum
C
±10% Maximum
Control Voltage Range (VC) / Test Conditions forAPR
1.65VDC ±1.35VDC (0.3VDC to 3.0VDC)
Control Voltage Range (VCR) / Transfer Function
0.0VDC to VDD / Positive Transfer Characteristic
Input Impedance (ZI)
50kOhms Typical
Modulation Bandwidth (MBW)
10kHz Minimum (-3dB, VC = 1.65VDC)
ENVIRONMENTAL & MECHANICAL
Shock:
Conditions and Criteria Listed in TQC41-883-007
Vibration:
Conditions and Criteria Listed in TQC41-883-008
Seal Integrity:
Conditions and Criteria Listed in TQC41-883-003
Solderability:
Conditions and Criteria Listed in TQC41-883-004 / 95% coverage
Marking Permenancy:
Conditions and Criteria Listed in TQC41-883-001
PART NUMBERING GUIDE
EV32C1 D 2 A 1 - 35.328M TR
Packaging Options
Frequency
Duty Cycle
Blank = Tubes (CPA74-004-000)
TR = Tape & Reel
1 = 50 ±10%
(CPA70-161-000)
2 = 50 ±5%
Linearity
A = 20% Maximum, B = 15% Maximum,
C = 10% Maximum
Absolute Pull Range (APR)
1 = ±20ppm Minimum, 2 = ±32ppm Minimum
3 = ±50ppm Minimum, 4 = ±80ppm Minimum
5 = ±100ppm Minimum
Frequency Tolerance & Stability / OTR
A = Not Specified over 0°C to +70°C
B = Not Specified over -40°C to +85°C
D = ±50ppm Max. over 0°C to +70°C
E = ±25ppm Max. over 0°C to +70°C
F = ±20ppm Max. over 0°C to +70°C
H = ±50ppm Max. over -40°C to +85°C
J = ±25ppm Max. over -40°C to +85°C
7.00
±0.15
5.08
±0.15
5.00
±0.15
3
4
2.60
2
1 ^±0.15
1.4
1.2
±0.1
3.68
±0.2
±0.15
1.60 ±0.20
All Dimensions In Millimeters
PIN CONNECTION
1 Control Voltage (VC)
2 Ground/Case Ground
3
Output
4
Supply Voltage
SPECIFICATION CONTROL DRAWING
MARKING GUIDE
Drawing Number
CSC12-560-000
(Line #1) ECLIPTEK
Title
(Line #2) XX.XXXM
Frequency
(Line #3) XX Y ZZ
ECLIPTEK
XX.XXXM
XXYZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Code (Per TEN02-001-000)
CERAMIC SMD 3.3V HCMOS/TTL VCXO
Revision
Effectivity Date
B
ECN Number
5632
PAGE 1 OF 2
NOTE: Pin 1 shall be marked with a dot. Marking shall
conform to conditions listed in TQC41-001-000.
Approved By
Date Released By
Date