EB52E9 Datasheet, PDF (1/2 Pages) Ecliptek Corporation – OSCILLATOR

EB52E9 Series
• RoHS Compliant (Pb-free)
• Temperature Compensated Crystal Oscillator (TCXO)
• Stratum 3
• HCMOS Output
• 3.3V Supply Voltage
• Ceramic 10-Pad SMD Package
• External Voltage Control Option Available
EB52E9
H 2.0
L 7.0
W 5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency (MHz)
Frequency Stability
Total Holdover Stability
6.400, 6.500, 9.720, 10.000, 12.800, 13.000
vs. Operating Temperature Range (V_DD = 3.3V_DC, V_C = 1.65V_DC)
Inclusive of Frequency Stability and 24 Hours Aging
Total Frequency Tolerance
Inclusive of Frequency Tolerance, Frequency Stability, V_DD (±1%), Load
(±5%), Solder Reflow, and 20 Years Aging
Operating Temperature Range
Supply Voltage (V_DD)
Input Current
Output Voltage Logic High (V_OH)
Output Voltage Logic Low (V_OL)
Rise/Fall Time
I_OH = -4mA
I_OL = +4mA
Measured at 20% to 80% of Waveform
Duty Cycle
Measured at 50% of Waveform
Load Drive Capability
External Trim (Control Voltage Option) 1.65V_DC ±1.65V_DC; Positive Transfer Characteristic
Control Voltage Range
Linearity
Input Impedance
Typical Phase Noise (at
At offset of 10Hz
12.800MHz)
At offset of 100Hz
At offset of 1kHz
At offset of >10kHz
Tri-State Input Voltage (V_IH and V_IL) No Connect
+0.9V_DD Minimum
+0.1V_DD Maximum
RMS Phase Jitter
F_J = 12kHz to 20MHz
Start Up Time
Storage Temperature Range
±0.28ppm Maximum
±0.37ppm Maximum
±4.6ppm Maximum
See Part Numbering Guide
3.3V_DC ±5%
10mA Maximum
90% of V_DD Minimum
10% of V_DD Maximum
5nSec Maximum
50 ±5(%) Maximum
15pF HCMOS Load
±5ppm Minimum
0.0V_DC to V_DD
5% Maximum
100kOhms Minimum
-80dBc/Hz
-115dBc/Hz
-135dBc/Hz
-145dBc/Hz
Enables Output
Enables Output
Disables Output: High Impedance
1pSec Maximum
5mSec Maximum
-40°C to 125°C
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
EB52E9
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS5Q
REV.DATE
07/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.