AC8300H Datasheet, PDF (9/15 Pages) ebm-papst – ACmaxx / i-maxx

max. 205 m3/h
ACmaxx axial fans
Series AC 4400 FN 119 x 119 x 25 mm
Highlights:
– Universally suitable for all AC voltages between 85 and 265 V.
– Fan speed independent of power frequency.
– Significantly reduced power consumption compared to conventional AC fans.
– Open loop speed control, sensor and alarm signal possible on request.
– Rigid compression curve for high air flow at high back pressure.
– Innovative impeller with winglets for low noise levels.
General attributes:
– Material: fibreglass-reinforced plastic. PA impeller, PBTP housing.
– Fully integrated electronic commutation. Protected against locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor.
– Mass: 370 g..
Nominal data
Type
AC 4400 FNN
m3/h CFM
V
Hz
VAC dB(A) Bel(A)
205 120,7 115 / 230 50 / 60 85 ... 265 53
6,2
Speed variants available on request.
/ Watts RPM
°C
Hours Hours
/
12 4 850 -20...+70 60 000 / 30 000 1
150 1
125
100
75
50
25
0
30
60
90
120
150 CFM
50
100 150 200 250 m³/h
25.4 + 0.15
57.9 ^{+ 0.5}
N_G
T I ^A PWM ^HP
133