AC6200NM_11 Datasheet, PDF (2/4 Pages) ebm-papst – AC axial compact fan

AC 6200 NM
AC axial compact fan
Technical features
Dimensions
General description
Connection line
Direction of rotation
Direction of air flow
Bearing
Lifetime L10 at 40 °C
Lifetime L10 at maximum
temperature
Mass
Housing material
Material of impeller
Motor protection
Protection class
Approval
172 Ø x 52 mm
Particular design features:
Can be used universally for all supply voltages between 85 and 265 VAC, 50-60 Hz.
Fan speed independent of the power frequency.
Significantly reduced power consumption compared to conventional AC voltage fans.
Open loop speed control, sensor and alarm signal available on request.
General features:
Material: housing made of aluminium. Impeller made of fibreglass-reinforced PA; housing with
grounding lug for screws M4 x 8 (Torx).
Electronic commutation completely integrated.
Protected against locking.
Connection via single strands AWG 22, TR 64, bared and tin-plated.
Air exhaust over bars. Direction of rotation counter-clockwise seen on rotor.
Mass: 900 g.
Single strands AWG 22, TR 64, bared and tin-plated.
Right, looking at rotor
Air exhaust over bars
Ball bearings
80000 h
40000 h
0.900 kg
Aluminum. Housing with grounding lug for screws M4 x 8 (TORX).
Fiberglass-reinforced PA plastic
Protected against reverse polarity and locking.
IP 54
UL, CSA, VDE
Web data sheet D · Page 2 of 4
ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · D-78112 St. Georgen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com