XG0010P Datasheet, PDF (1/1 Pages) E-SWITCH – ALL DIMENSIONS IN MM [INCH]

SHEET 1 OF 1
A
12
CONTACT CONFIGURATION
TIMING (BBM) NON-SHORTING
HEX NUT AND WASHER
NOT SHOWN
IN VIEW
n26.00
[1.024 in]
KC52A10.001NPF
(G510346)
B
n6.35
[.250 in]
8.00
[.315 in]
10.00
[.394 in]
14.20
[.559 in]
2.00
[.079 in]
9.50
[.374 in]
LOCKING RING
(G200000)
5.50 FLAT
[.217 in]
SLOT 2
n3.00
3/8-32 UNEF-2A
THREADS
NOTE:
[.118 in]
HARDWARE SUPPLIED
ON SWITCH
1. ALL DIMENSIONS IN MM[INCH].
2. GENERAL TOLERANCE: X.X=`0.4
X.XX=`0.25
3. TERM. NOS. FOR REFERANCE ONLY.
4. CONTACT MATERIAL: GOLD FLASH OVER SILVER
5. CONTACT RATING: 150MILLIAMP, 250VAC/DC
350MILLIAMP, 110VAC/DC
6. CONTACT RATING (NON-SWITCHING) 5A
7. OPERATING TORQUE 800`300 g-cm
8. OPERATING TEMP: -30~C TO 85~C
9. CIRUIT SP: 12 POSITION 30~ INDEX (LOCKRING LIMITED TO 2 POSITION).
10. DIELECTRIC STRENGTH: 1000V RMS MIN.@ SEA LEVEL.
11. HARDWARE SUPPLIED ON SWITCH:
LOCKWASHER, HEXNUT, STOP RING (TAB IN POSITION 2)
12. DENOTES CRITICAL PARAMETER.
13. 2002/95/EC (ROHS) COMPLIANT
2.00
[.079 in]
15.60
[.614 in]
3.40
[.134 in]
B
21392
CORRECT BASE SWITCH PART NUMBER
3/4/14
EBP
A
21105
RELEASED FOR PRODUCTION
4/17/13 _EBP ^TITLE KC52A10.001NPF W/LOCKRING
REV
PCR NO
DESCRIPTION
DATE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY
TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED
BY
SCALE
DATE
4/17/2013
DR
EBP
n22.20
[.874 in]
n7.70
[.303 in]
30°
DWG
REV
XG0010P
B