T324076 Datasheet, PDF (1/1 Pages) E-SWITCH – ALL DIMENSIONS IN MM [INCH].

SHEET 1 OF 1
R.13
[.005 in]
18.16
[.715 in]
12.70
[.500 in]
11.43
[.450 in]
ISOMETRIC
15.70 *
[.618 in]
RECOMMENDED
MOUNTING
* DIMENSION TO BE 15.75 - 15.88
FOR PANEL THICKNESS BETWEEN
2.31 - 3.18 mm
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
2.36
[.093 in]
2.36
[.093 in]
POS. 2
POS. 1
POS. 3
(ON)
OFF
(ON)
2-3, 5-6 OPEN 2-1, 5-4
PANEL THICKNESS:
1.19 TO 3.18
[.047 TO .125 in]
ACTUATOR COLOR:
GRAY
12.6
[.50 in]
8.2
[.32 in]
2
5
1
34
6
CIRCUIT: DPDT
8.89
[.350 in]
RATING
NOTE:
1. ALL DIMENSIONS IN MM [INCH]
2. GENERAL TOLERANCE: X.X=±0.4
X.XX=±0.25
3. TERMINAL NUMBERS FOR REF ONLY
4. PLATING MATERIAL: SILVER
5. RATING: 5 AMPS @120VAC (OR 28VDC)
2 AMPS @250VAC
6. CONTACT RESISTANCE: 10 MILLI-OHMS MAX.
7. MECHANICAL LIFE: 40,000 MAKE-AND-BREAK CYCLES.
8. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN.
9. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL.
10. OPERATING TEMP.: -30°C to 85°C
11. DENOTES CRITICAL PARAMETER.
4.70
[.185 in]
E-SWITCH
MARKING ON
OPPOSITE SIDE
1.98
[.078 in]
4
5
6
12.70
[.500 in]
EPOXY SEAL ₆
3
3.96
[.156 in]
.76
[.030 in]
11.43
[.450 in]
2.03
[.080 in]
1.19
[.047 in]
4.83
[.190 in]
A
REV
18655
PCR NO
RELEASED FOR PRODUCTION
9/18/09
DESCRIPTION
DATE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY
TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED
BLR
BY
TITLE _{300DP4R8GRYM1QE}
SCALE
2:1
DATE
9/18/2009
DR
BLR
DWG
T324076
REV
A