T211121 Datasheet, PDF (1/1 Pages) E-SWITCH – ALL DIMENSIONS IN MM [INCH]

SHEET 1 OF 1
2.54
[.100 in]
n1.09
[.043 in]
P.C. MOUNTING
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
ON
NONE
ON
2-3
OPEN
2-1
8.13
[.320 in]
5.08
[.200 in]
n6.00
[.236 in]
4.39
[.173 in]
FLAT
POS. 1
25~
5.59
[.220 in]
POS. 3
B
9.40
[.370 in]
2.54
n_{[.100 in]}
ISOMETRIC
2
1
3
CIRCUIT: SPDT
RATING
NOTE:
1. ALL DIMENSIONS IN MM [INCH]
2. GENERAL TOLERANCE: X.X=±0.4
X.XX=±0.25
3. TERMINAL NUMBERS FOR REF ONLY
4. PLATING MATERIAL: GOLD
5. RATING: 0.4VA MAX. @20V MAX (AC OR DC)
6. ELECTRIC LIFE: 30,000 MAKE-AND-BREAK CYCLES
AT FULL LOAD.
7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN.
8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL.
9. OPERATING TEMP.: -30°C to 85°C
10. DENOTES CRITICAL PARAMETER.
12 3
.51
[.020 in]
2.54
[.100 in]
E-LOGO ON
OPPOSITE SIDE
.51
[.020 in]
8.64
[.340 in]
NO EPOXY ON TERMINALS
BELOW THIS SURFACE
EPOXY
SEAL
3.30
[.130 in]
3
.76
[.030 in]
B
A
REV
18465
18435
PCR NO
ACTUATOR DIM UPDATED
3/23/09
RELEASE FOR PRODUCTION
3/19/09
DESCRIPTION
DATE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY
TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED
BLR
BLR
BY
TITLE _{200MSP1T1B2M2RE}
SCALE
2:1
DATE
3/23/2009
DR
BLR
DWG
T211121
REV
B