ST1 Datasheet, PDF (1/1 Pages) E-SWITCH – ST1 Series

ST1 Series
High
Amperage
Water
Protection
Heavy
Duty
Rear
Panel Mount
FEATURES:
• Heavy Duty Rating with UL Approvals
• Many Functions Available
• Tab, Screw, and Solder Terminal Options
• Rubber Boot for Water and Dust Protection
SPECIFICATIONS:
RATING: MAINTAINED SWITCHES:
20A 125VAC [cULus]
15A 250VAC [cULus]
2HP 125-250VAC [cULus]
MOMENTARY SWITCHES:
20A 125VAC [cULus]
15A 250VAC [cULus]
1.5HP 125-250VAC [cULus]
TEMPERATURE: -20°C to 85°C
ELECTRICAL LIFE: 6,000 Cycles
CONTACT RESISTANCE: 50m Max.
INSULATION RESISTANCE: 800M Min. at 500VDC
DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
MATERIALS:
BODY: Phenolic, UL94 V-0
ACTUATOR: Nickel Plated Brass
BUSHING: Nickel Plated Brass
HOUSING: Stainless Steel
CONTACTS: Silver Alloy
TERMINALS: Silver Plated Brass
Series
ST1 - 1 Pole
Terminal
Function
Rating
Actuator
Type
Bushing
Type
1 - 4.8mm Tabs
1 Pole:
D - 20A 125VAC
2 - Solder
1 - Off-On
4 - 6.3mm Tabs
3 - On-On
6 - Screw
4 - Off-(On), Middle-End
5 - On-Off-On
Variable Length: C - On-Off-(On)
Wxx - Wire Leads D - (On)-Off-(On)
(xx in Inches)
0 - Standard Bat
1 - Short Bat
0 - M12x1.0
2 - 15/32"-32UNS
ST1W61D00
ST161D10
Accessories Series Type
Options
ACC
Rubber Boot:
B03 - For Standard Bat
Colors for Boot:
2 - Black
Marking Plates:
M01 - ON/Off
Colors for Marking Plates:
3 - Black, Red, and Silver
Hardware:
Threading:
N02 - Knurled Nut
3 - 15/32"-32UNS
5 - M12x1.0
LAMB
INDUSTRIES Ph: 503-297-8878 • Fax: [phone]
EXAMPLE PART NUMBERS:
ST121D00
1P Off-On
Standard Actuator/Bushing, Solder
ST123D00
1P On-On
Standard Actuator/Bushing, Solder
ST124D00
1P Off-(On)
Standard Actuator/Bushing, Solder
ST125D00
1P On-Off-On
Standard Actuator/Bushing, Solder
ST12DD00
1P (On)-Off-(On)
Standard Actuator/Bushing, Solder
ST141D00
1P Off-On
Standard Actuator/Bushing, 0.250" QC
ST143D00
1P On-On
Standard Actuator/Bushing, 0.250" QC
ST144D00
1P Off-(On)
Standard Actuator/Bushing, 0.250" QC
P.O. Box 25110 • Portland, OR 97298 USA • www.lambind.com