KAS Datasheet, PDF (1/2 Pages) E-SWITCH – SLIDE DIP SWITCHES

SERIES KAS SWITCHES
SLIDE DIP SWITCHES
FEATURES & BENEFITS
Available in 2 to 12 positions
Tape seal option
Vertical & right angle options
APPLICATIONS / MARKETS
Garage door openers
Test & instrumentation
Telecommunications
Controller application
SPECIFICATIONS
Switch Function:
Contact Rating:
Insulation Resistance:
Contact Resistance:
Operating Life:
Operating Force:
Travel (Actuator):
Dielectric Strength:
Temperature Range:
Vibration:
Shock:
Soldering
Recommendations:
SPST, 2 thru 12 positions (except position 11)
Switch: 25mA @ 24V DC
Carry: 100mA @ 50V DC
100 MΩ Min. @ 500V DC
Initial:50 mΩ typical @ 2-4V DC @ 100mA
After Life: 100mΩ typical @ 2-4 DC @ 100mA
2,000 make-and-break cycles, each circuit
1000 gf max.
2.0 mm typical
500V RMS min. @ sea level between
adjacent terminals
Operating/Storage: -40° C to 85° C
To MIL-STD-202F, Method 201 A
To MIL-STD-202F, Method 213B, Condition A
Wave: 500 F (260 C) for 5s max;
Hand: 30W soldering iron @ 608 F (320 C) for 2s
typical. Keep all switches in the “OFF” position
during soldering and cleaning process.
MATERIALS
Housing and Actuator: Glass filled polyester (PBT) UL94-V0
Contacts:
Phosphor Bronze with gold plate over nickel plate
Terminals:
Phosphor Bronze with gold plate over nickel plate
Tape:
Mylar
PACKAGING
Switches are supplied in standard IC tubes with all poles in the “OFF” position.
HOW TO ORDER
SERIES
KA
KA
MODEL NO.
TERMINATION
S = Slide Type
1 = PC Pin
2 = Right Angle
PC Pin
CIRCUIT
1 = SPST
Example Ordering Number
KA_ S_ 1_ 1_ 04_R_ T
NO. OF
POSITIONS
02
03
04
05
06
07
08
09
10
12
ACTUATOR
R = Recessed Act.,
Top Side OFF*
E = Extended Act.,
Top Side OFF
SEAL
(None) = Std.
Unsealed
T = Top Tape
Sealed
* Not available with right angle termination.
Specifications subject to change without notice.
216
Phone: [phone]
Fax: [phone]