52-PV4F2B0SS344 Datasheet, PDF (1/1 Pages) E-SWITCH – HARDWARE SUPPLIED: O-RING AND HEXNUT

SHEET 1 OF 1
n19.00
[.748 in]
SWITCH FUNCTION
POS. 1 POS. 2
n22.00
[.866 in]
PANEL CUTOUT
MAX. PANEL THICKNESS
11.0mm [.433]
ON
(ON)
1-3
1-2
(ON) = MOMENTARY
n13.40
[.528 in]
FLAT ACTUATOR
1
3
BODY FINISH
MACHINED STAINLESS
1
2
(-)
(+)
SPDT
CONTACT CONFIGURATION
28.50 `.50
[1.122 `.020 in]
38.00 `.50
NOTE:
[1.496 `.020 in]
1. ALL DIMENSIONS IN MM [INCH]
2. GENERAL TOLERANCE: X.X=±0.4
X.XX=±0.25
3. TERMINAL NUMBERS FOR REF ONLY
4. CONTACT MATERIAL: SILVER
5. RATING: 2A 48VDC
6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES
(-)
AT FULL LOAD.
7. INSULATION RESISTANCE: 1,000 MΩ MIN.
8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE
9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC
2.60
[.102 in]
10. OPERATING TEMP.: -20°C to 55°C
11. TRAVEL: 2.8mm
12. DENOTES CRITICAL PARAMETER.
12.00
[.472 in]
13. LAMP VOLTAGE: 12V
14. INGRESS PROTECTION: IP65
15. HARDWARE SUPPLIED: O-RING AND HEXNUT
16. ILLUMINATION COLOR: BLUE ( BLUE / BLUE)
RING ILLUMINATION
ACTUATOR FINISH
MACHINED STAINLESS
2.00
[.079 in]
M19x1.0
1
(+)
.50
[.020 in]
1
(+)
5.00
[.197 in]
NOTE 15
HARDWARE SUPPLIED
3
2.80
[.110 in]
5.00
[.197 in]
A
REV
20323
PCR NO
RELEASE FOR PRODUCTION
12/7/11
DESCRIPTION
DATE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY
TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED
BGL
BY
TITLE _{PV4F2B0SS-344}
SCALE
1.5:1
DATE
12/7/2011
DR
BGL
DWG
52-PV4F2B0SS344
REV
A