AXUV16ELG Datasheet, PDF (1/2 Pages) OptoDiode Corp – PHOTODIODE 16 ELEMENT 40 pin dual in-line package

PHOTODIODE 16 ELEMENT
AXUV16ELG
FEATURES
• 40 pin dual in-line package
• Ideal for electron detection
• 100% internal QE
ELECTRO-OPTICAL CHARACTERISTICS AT 25°C (Per Element)
PARAMETERS
TEST CONDITIONS
MIN
Active Area
2mm x 5mm
Responsivity, R
(see graphs on next page)
Reverse Breakdown Voltage, V_R
I_R = 1µA
Capacitance, C
V_R = 0V
Rise Time
V_R = 0V
Shunt Resistance (per element)
V_f = ±10mV
100
Dimensions are in inch [metric] units.
TYP
10
25
500
MAX
40
UNITS
mm²
A/W
Volts
pF
nsec
MOhms
THERMAL PARAMETERS
STORAGE AND OPERATING TEMPERATURE RANGE
Ambient¹
Nitrogen or Vacuum
Maximum Junction Temperature
Lead soldering temperature²
-10° TO 40°C¹
-20°C TO 80°C
70°C
260°C
1_{Temperatures exceeding these parameters may create oxide growth on the active area.}
Over time responsivity to low energy radiation and wavelengths below 150nm will be compromised.
2_{0.080" from case for 10 seconds.}
Shipped with temporary cover to protect photodiode and wire bond.
Review Opto Diode “Handling Precautions for IRD Detectors” prior to removing cover.
750 Mitchell Road, Newbury Park, California 91320
Phone: [phone], Fax: [phone]
Email: [e-mail], Website: www.optodiode.com
Revision February 26, 2013