1N5765 Datasheet, PDF (1/2 Pages) Opto Electronics Co,. LTD – JAN QUALIFIED HERMETIC LED INDICATORS

62035
1N5765
1N6092
1N6093
1N6094
JAN QUALIFIED HERMETIC
LED INDICATORS
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• Hermetically sealed
• Choice of colors (Red, Yellow, Green)
• Wide Viewing Angle
• Panel Mount versions with wire wrappable leads
• Designed for Hi-Reliability applications
Applications:
• P.C. Board Fault Indicator
• Logic Status Indicator
• Binary Data Display
• Power supply on/off indicator
DESCRIPTION
The 1N5765, 1N6092, 1N6093 and 1N6094 series indicators are hermetically sealed in TO-46 packages. A tinted diffused
dome lens provides good on/off contrast and a wide viewing angle. The 1N5765 indicator utilizes a GaAsP on GaAs LED. The
1N6092 (red) and 1N6093 (yellow) indicators utilize a high efficiency GaAsP on GaP LED, while the 1N6094 indicator utilizes
a GaP on GaP LED. Each type uses a colored diffused plastic lens over a glass window. All versions are available in standard,
JAN or JANTX screened levels.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature.............................................................................................................................................. -65°C to +100°C
Operating Temperature .......................................................................................................................................... -55°C to +100°C
Reverse Voltage ....................................................................................................................................................................... 5Vdc
Reverse Voltage (1N5765). ....................................................................................................................................................…4Vdc
Power Dissipation (Derate at the rate of 2.4 mW/°C above 50°C) ....................................................................................... 120mW
Power Dissipation (1N5765)....(Derate at the rate of 3.0 mW/^°C above 50°C) .................................................................... 150mW
Forward Current-Continuous .................................................................................................................................................... 35mA
Forward Current-Continuous (1N5765) ................................................................................................................................... 50mA
Lead Soldering Temperature (1/16” (1.6mm) from case for 10 seconds) ...............................................................................260°C
Maximum Mounting Torque (Panel mount version).............................................................................................................. 25in•lbs
Indicator Dimensions
Panel Mount Dimensions
Schematic Diagram
.225 [5.72]
.180 [4.57]
0.024 [0.62]
0.016 [0.41]
GOLD PLATED KOVAR
0.190 [4.83]
0.176 [4.47]
TINTED DIFFUSED DOME
1.030 [26.16]
0.97 [24.64]
0.520 [13.21]
0.500 [12.70]
0.070 [1.78]
0.060 [1.52]
0.583 [14.81]
0.500 [12.70]
CATHODE
0.105 [2.67]
0.095 [2.41]
0.312-32 UNF-2A
ALODINE
0.028 [0.71]
0.022 [0.56]
Ø 0.038[9.86]
Ø 0.373[9.47]
CATHODE
0.139 [3.53]
0.133 [3.38]
0.025 [0.64] NOMINAL
0.020 [0.51]
0.016 [0.41]
CATHODE
Ø0.220 [5.59]
Ø0.200 [5.08]
0.042 [1.07]
0.032 [0.81]
0.045 [1.14]
0.035 [0.89]
.055 [1.39]
.045 [1.14]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
0.372 [9.45]
0.089 [2.26]
0.425 [10.80]
0.420 [10.67]
0.021 [0.53]
NOTES:
1. ALL EXTERNAL METAL SURFACES OF THE PACKAGE
ARE BLACK ANODIZED EXCEPT FOR THE ALODINE
AREA OF THE FLANGE AND THE GOLD-PLATED LEADS.
2. MOUNTING HARDWARE WHICH INCLUDES ONE LOCK
WASHER AND ONE HEX NUT IS INCLUDED WITH EACH
PANEL MOUNTABLE HERMETIC SOLID STATE LAMP.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
1-5