EC76SMCJXX Datasheet, PDF (1/6 Pages) E-CMOS Corporation – Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors
Peak Pulse Power 1500W
Stand-off Voltage 5.0 to 440V
EC76SMCJxx
Features
■ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
■ Low profile package with built-in strain relief for
surface mounted applications
■ Glass passivated junction
■ Low incremental surge resistance, excellent
clamping capability
■ 1500W peak pulse power capability with a 10/1000us
waveform, repetition rate (duty cycle): 0.01%
■ Very fast response time
■ High temperature soldering guaranteed:
250℃ /10 seconds at terminals
EC76SMCJ5.0 thru 440
Mechanical Date
■ Case: JEDEC DO-214AB(SMC J-Bend) molded plastic over passivated junction
■ Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
■ Polarity: For unidirectional types the band denotes the cathode, which is positive with respect to the anode under normal
TVS operation
■ Weight: 0.007oz., 0.21g
Absolute Maximum Ratings
(Ratings at 25℃ambient temperature unless otherwise specified.)
Parameter
Peak pulse power dissipation with a 10/1000 us waveform^(1,2) (see Fig. 1)
Peak pulse current with a 10/1000 us waveform⁽¹⁾
Peak forward surge current 8.3ms single half sine-wave uni-directional only⁽²⁾
Typical thermal resistance, junction to ambient⁽⁴⁾
Typical thermal resistance, junction to lead
Operating junction and storage temperature range
Symbol
PPPM
IPPM
IFSM
RθJA
RθJL
TJ,TSTG
Value
Minimum 1500
See Next Table
200
75
15
-55 to +150
Unit
W
A
A
℃/W
℃/W
℃
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig. 2.
2. Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal
3. Mounted on minimum recommended pad layout
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 6
5EC04N Rev.F001