EC5912 Datasheet, PDF (1/10 Pages) E-CMOS Corporation – 200MHz, CMOS, Rail-to-Rail Output Operational Amplifier

200MHz, CMOS, Rail-to-Rail
Output Operational Amplifier
EC5912
General Description
Features
The EC5912 is wideband, low-noise, low-distortion
operational amplifier, that offer rail-to-rail output and
single-supply operation down to 2.2V. They draw 5.6mA of
quiescent supply current, as well as low input voltage-noise
density (13nV/Hz) and low input current-noise density
(400fA/Hz). These features make the devices an ideal
choice for applications that require low distortion and low
noise. The EC5912 has output which swing rail-to-rail
and their input common-mode voltage range includes
ground and offer wide bandwidth to 200MHz
(G=+1) .They are specified over the extended industrial
temperature range (-45℃ ~ 125℃).The single EC5912 is
available in space-saving, MSOP-8 and SOP-8 packages.
● Single-Supply Operation from +2.2V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 200MHz
● Low Input Bias Current: 10pA
● Low Offset Voltage: 1mV
● Quiescent Current: 5.6mA
● Available in MSOP-8 and SOP-8 Packages
Applications


● Portable Equipment
● Mobile Communications
● Smoke Detector
● Sensor interface
● Medical Instrumentation
● Handheld Test Equipment
● imaging / video
Pin Configurations(Top View)
Figure 1. Pin Assignment Diagram (MSOP-8 and SOP-8 Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 10
3L18N-Rev.P001