EC5911 Datasheet, PDF (1/6 Pages) E-CMOS Corporation – 200MHz, High-Speed, CMOS, Rail-to-Rail Operational Amplifier

200MHz, High-Speed, CMOS,
Rail-to-Rail Operational Amplifier
EC5911
General Description
Features
The EC5911 is wideband, low-noise, low-distortion
operational amplifier, that offer rail-to-rail output and
single-supply operation down to 2.5V. They draw 2.8mA of
quiescent supply current, as well as low input voltage-noise
density (13nV/ Hz) and low input current-noise density
(400fA/ Hz). These features make the devices an ideal
choice for applications that require low distortion and low
noise.The EC5911 has output which swing rail-to-rail
and their input common-mode voltage range includes
ground and offer wide bandwidth to 200MHz
(G=+1) .They are specified over the extended industrial
temperature range (-45 C ~ 125 C).The single EC5911 is
available in space-saving, SOT23-5 and SOP-8 packages.
● Single-Supply Operation from +2.5V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 200MHz (Typ.)
● Low Input Bias Current: 10pA (Typ.)
● Low Offset Voltage: 5mV (Max.)
● Quiescent Current: 2.8mA (Typ.)
● Operating Temperature: -40°C ~ +125°C
● Available in SOT23-5 and SOP8 Packages
Applications


● Portable Equipment
● Mobile Communications
● Smoke Detector
● Sensor interface
● Medical Instrumentation
● Handheld Test Equipment
● imaging / video
Pin Assignments
Figure 1. Pin Assignment Diagram (SOT23-5 and SOP8 Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 6
3K29N-Rev.P001