EC5822 Datasheet, PDF (1/12 Pages) E-CMOS Corporation – 10MHz, Low-Power, CMOS, Rail-to-Rail Dual Operational Amplifier

10MHz, Low-Power, CMOS,
Rail-to-Rail Dual Operational Amplifier
EC5822
General Description
Features
The EC5822 is wideband, low-noise, low-distortion
dual operational amplifier, that offer rail-to-rail
inputs/outputs and single-supply operation down to
2.2V. They draw 1.6mA of quiescent supply current
while featuring ultra-low distortion(0.0002% THD+N), as
well as low input voltage-noise density (15nV/ Hz)
and low input current-noise density (0.5fA/ Hz).
These features make the devices an ideal choice for
applications that require low distortion and/or low noise.
These amplifiers have inputs and outputs which swing rail-
to-rail and their input common-mode voltage range includes
ground.
The maximum input offset of these amplifiers is less
than 5mV. The EC5822 are unity-gain stable with a
gain-bandwidth product of 10MHz.The EC5822 is
available in SOP8 and MSOP8 packages. The
extended temperature range of -40°C to +125°C over all
supply voltages offers additional design flexibility.
● Single-Supply Operation from +2.2V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 10MHz (Typ.)
● Low Input Bias Current: 10pA (Typ.)
● Low Offset Voltage：5mV(Max.)
● Quiescent Current: 800μA per Amplifier (Typ.)
● Operating Temperature: -40°C ~ +125°C
● Available in SOP8 and MSOP8 Packages
Applications


● Portable Equipment
● Mobile Communications
● Smoke Detector
● Sensor Interface
● Medical Instrumentation
● Battery-Powered Instruments
● Handheld Test Equipment
Pin Assignments
Figure 1. Pin Assignment Diagram (SOP8 and MSOP8 Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 12
3K29N-Rev.P001