EC5759 Datasheet, PDF (1/12 Pages) E-CMOS Corporation – 1MHz, Low Power, CMOS, Rail-to-Rail Dual Operational Amplifier

1MHz, Low Power, CMOS,
Rail-to-Rail Dual Operational Amplifier
EC5759
General Description
Features
The EC5759 is a single supply, low power CMOS dual
operational amplifier; these amplifiers offer bandwidth of
1MHz, rail-to-rail inputs and outputs, and single-supply
operation from 2.2V to 5.5V. Typical low quiescent supply
current of 80μA in dual operational amplifier within one chip
and very low input bias current of 10pA make the devices
an ideal choice for low offset, low power consumption and
high impedance applications such as smoke detectors,
photodiode amplifiers, and other sensors.
The EC5759 is available in SOP-8L and MSOP-8L
packages. The extended temperature range of -40 ℃ to
+125 ℃ over all supply voltages offers additional design
flexibility.
● Single-Supply Operation from +2.2V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 1MHz (Typ.)
● Low Input Bias Current: 10pA (Typ.)
● Low Offset Voltage: 5mV (Max.)
● Quiescent Current: 40μA per Amplifier (Typ.)
● Operating Temperature: -40°C ~ +125°C
● Available in SOP-8L and MSOP-8L Packages
Applications
● Portable Equipment
● Smoke Detector
● Medical Instrumentation
● Battery-Powered Instruments
● Mobile Communications
● Sensor Interface
● Handheld Test Equipment
Pin Assignments
Figure 1. Pin Assignment Diagram (SOP-8L and MSOP-8L Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 12
3L27N-Rev.P001