EC5756 Datasheet, PDF (1/13 Pages) E-CMOS Corporation – 250kHz, 7uA, CMOS, Rail-to-Rail Dual Operational Amplifier

250kHz, 7μA, CMOS,
Rail-to-Rail Dual Operational Amplifier
Amplifier
EC5756
General Description
Features
The EC5756 is a single supply, low power CMOS
operational amplifier; these amplifiers offer bandwidth of
250kHz, rail-to-rail inputs and outputs, and single-supply
operation from 2.2V to 5.5V. Typical low quiescent supply
current of 14μA in dual operational amplifiers within one
chip and very low input bias current of 10pA make the
devices an ideal choice for low offset, low power
consumption and high impedance applications. The
EC5756 is available in SOP8 and MSOP8 packages.. The
extended temperature range of -40 ℃ to +125℃ over all
supply voltages offers additional design flexibility.
● Single-Supply Operation from +2.2V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 250kHz (Typ.)
● Low Input Bias Current: 10pA (Typ.)
● Low Offset Voltage: 5.5mV (Max.)
● Quiescent Current: 7μA per Amplifier (Typ.)
● Operating Temperature: -40°C ~ +125°C
● Available in SOP8 and MSOP8 Packages
Applications
● Portable Equipment
● Mobile Communications
● Smoke Detector
● Sensor Interface
Pin Assignments
● Handheld Test Equipment
● Medical Instrumentation
● Battery-Powered Instruments
Figure 1. Pin Assignment Diagram (SOP8 and MSOP8 Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 13
3L03N-Rev.P001