EC5724 Datasheet, PDF (1/12 Pages) E-CMOS Corporation – 1MHz, Low Power, CMOS, Rail-to-Rail Quad Operational Amplifier

1MHz, Low Power, CMOS,
Rail-to-Rail Quad Operational Amplifier
EC5724
General Description
Features
The EC5724 is a single supply, low power CMOS quad
operational amplifier; these amplifiers offer bandwidth of
1MHz, rail-to-rail inputs and outputs, and single-supply
operation from 2.2V to 5.5V. Typical low quiescent supply
current of 160μA in dual operational amplifier within one
chip and very low input bias current of 10pA make the
devices an ideal choice for low offset, low power
consumption and high impedance applications such as
smoke detectors, photodiode amplifiers, and other sensors.
The EC5724 is available in SOP-14 and TSSOP-14
packages. The extended temperature range of -40 ℃ to
+125 ℃ over all supply voltages offers additional design
flexibility.
● Single-Supply Operation from +2.2V ~ +5.5V
● Rail-to-Rail Input / Output
● Gain-Bandwidth Product: 1MHz (Typ.)
● Low Input Bias Current: 10pA (Typ.)
● Low Offset Voltage: 5mV (Max.)
● Quiescent Current: 40μA per Amplifier (Typ.)
● Operating Temperature: -40°C ~ +125°C
● Available in SOP-14 and TSSOP-14 Packages
Applications
●Portable Equipment
●Mobile Communications
● Smoke Detector
●Medical Instrumentation
●Battery-Powered Instruments
●Sensor Interface
●Handheld Test Equipment
Pin Assignments
Figure 1. Pin Assignment Diagram (SOP-14 and TSSOP-14 Package)
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 12
3L24N-Rev.P001