|
EC4503 Datasheet, PDF (1/13 Pages) E-CMOS Corporation – White LED Set-up Converter | |||
|
White LED Set-up Converter
EC4503
General Description
Features
The EC4503 is a current-mode and fixed frequency
Boost converter with an integrated N-FET to drive
white LEDs.
The series connection allows the LED current to be
identical for uniform brightness. Its low on-resistance
of NFET and low feedback voltage reduce power loss
and achieve high efficiency. Fast switching frequency
(1.5MHz typical) allows using small size inductor and
both of input and output capacitors. An over voltage
protection function, which monitors the output voltage
via OVP pin,stops switching of the IC if the OVP voltage
exceeds the over voltage threshold. An internal soft-start
circuit eliminates the inrush current during start-up.
The EC4503 also integrates under-voltage lockout,
Overtemperature protection, and current limit circuits to
Protect the IC in abnormal conditions.
The EC4503 is available in a SOT-23-6 packages.
âWide Input Voltage from 2.7V to 6V
â0.2V Reference Voltage
âFixed 1.5MHz Switching Frequency
âPWM Brightness Control with Wide Frequency
Range of 100Hz to 100kHz
âBuildâIn Power MOSFET : 0.2Ω
âOpenâLED Protection
âUnderâVoltage Lockout Protection
âOverâTemperature Protection
â<1mA Quiescent Current during Shutdown
âSOTâ 23â 6 Packages
â Lead Free and Green Devices Available
â(RoHS Compliant)
Applications
âWhite LED Display Backlighting
âCell Phone and Smart Phone
âPDA, PMP, MP3
âDigital Camera
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 13
3H29N-Rev.F001
|
▷ |