EC3618 Datasheet, PDF (1/8 Pages) E-CMOS Corporation – PWM Control 2A Step-Down Converter

PWM Control 2A Step-Down Converter
EC3618
General Description
EC3618 consists of step-down switching regulator with PWM control. These devise include a reference voltage source,
oscillation circuit, error amplifier, internal PMOS and etc. EC3618 provides low-ripple power, high efficiency, and excellent
transient characteristics. The PWM control circuit is able to the duty ratio linearly form 0 up to 100%. This converter is build
out soft start function that prevents overshoot and inrush current at startup. An over current protect function and short circuit
protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced. An external
compensation is easily to system stable; the low ESR output capacitor can be used. With the addition of an internal P-
channel Power MOS, a coil, capacitors, and a diode connected externally, these ICs can function as step-down switching
regulators. They serve as ideal power supply units for portable devices when coupled with the SOP-8L with exposed pad
package, providing such outstanding features as low current consumption. Since this converter can accommodate an input
voltage up to 58V, it is also suitable for the operation via an AC adapter.
Features
- Input voltage：8V to 58V
- Output voltage：3.3V to 56V
- Duty ratio：0% to 100% PWM control
- Enable and Soft-Start function
- Current Limit, Short Circuit Protect (SCP) and Thermal Shutdown protection
- Built-in internal SW P-channel MOS.
- SOP-8L-EP Pb-Free package.
Block Diagram
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 8
4K25N-Rev.F003