EC24C02B Datasheet, PDF (1/17 Pages) E-CMOS Corporation – 2Kbit I2C SERIAL EEPROM

2Kbit I²C SERIAL EEPROM
EC24C02B
Description
The EC24C02B is a 2 Kbit Electrically Erasable
PROM, The device is organized as one block
of 256 x 8-bit memory with a 2-wire serial
interface. Low-voltage design permits operation
down to 1.8V, with standby and active currents of
only 1µA and 1 mA, respectively.
The EC24C02B also has a page write
capability for up to 8 bytes of data. The EC24C02B
is available in the standard 8-pin PDIP, surface
mount SOP, TSSOP,DFN, SOT23 package.
Pin Configuration
SOP-8
TSSOP-8
Features
 Single supply with operation down to 1.8v
 Low-power CMOS technology:
1 mA active current, typical
1 µA standby current, typical(l-temp)
 Organized as 1 block of 256 bytes (1×256×8)
 2-wire serial interface bus, l²C compatible
 Schmitt Trigger inputs for noise suppression
 Output slope control to eliminate ground bounce
 400 kHz (24C02B) compatibility
 Self-timed write cycle (including auto-erase)
 Page write buffer for up to 8 bytes
 Hardware write-protect for entire memory
 Can be operated as a serial ROM
 Factory programming (QTP) available
 ESD protection>4,000V
 1,000,000 erase/write cycles
 Data retention>200 years
 Pb-free finish available
PDIP-8
DFN-8L
Top-View
Pin Name
A0 - A2
SDA
SCL
WP
GND
VCC
Top-View
Functions
Address Inputs
Serial Data
Serial Clock Input
Write Protect
Ground
Power Supply
Top-View
SOT23-5
Top-View
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 17
5F12N-Rev. F002